Cypress Semiconductor /psoc63 /BLE /BLELL /ADV_CONFIG

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as ADV_CONFIG

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (ADV_STRT_EN)ADV_STRT_EN 0 (ADV_CLS_EN)ADV_CLS_EN 0 (ADV_TX_EN)ADV_TX_EN 0 (SCN_RSP_TX_EN)SCN_RSP_TX_EN 0 (ADV_SCN_REQ_RX_EN)ADV_SCN_REQ_RX_EN 0 (ADV_CONN_REQ_RX_EN)ADV_CONN_REQ_RX_EN 0 (SLV_CONNECTED_EN)SLV_CONNECTED_EN 0 (ADV_TIMEOUT_EN)ADV_TIMEOUT_EN 0 (ADV_RAND_DISABLE)ADV_RAND_DISABLE 0 (ADV_SCN_PEER_RPA_UNMCH_EN)ADV_SCN_PEER_RPA_UNMCH_EN 0 (ADV_CONN_PEER_RPA_UNMCH_EN)ADV_CONN_PEER_RPA_UNMCH_EN 0ADV_PKT_INTERVAL

Description

Advertiser configuration register

Fields

ADV_STRT_EN

Enable advertising event start interrupt.

ADV_CLS_EN

Enable advertising event stop interrupt.

ADV_TX_EN

Enable adv packet transmitted interrupt.

SCN_RSP_TX_EN

Enable scan response packet transmitted interrupt.

ADV_SCN_REQ_RX_EN

Enable scan request packet received interrupt.

ADV_CONN_REQ_RX_EN

Enable connect request packet received interrupt.

SLV_CONNECTED_EN

Enable slave connected interrupt.

ADV_TIMEOUT_EN

Enable adv_timeout interrupt. Applicable in adv_direct_ind advertising.

ADV_RAND_DISABLE

Disable randomization of adv interval. When disabled, interval is same as programmed in adv_interval register.

ADV_SCN_PEER_RPA_UNMCH_EN

Enable scan request packet received with peer device address unmatched interrupt. This bit is valid only if PRIV_1_2 PRIV_1_2 and PRIV_1_2_ADV are set.

ADV_CONN_PEER_RPA_UNMCH_EN

Enable connect request packet received with peer device address unmatched interrupt. This bit is valid only if PRIV_1_2 and PRIV_1_2_ADV are set.

ADV_PKT_INTERVAL

Time between the beginning of two consecutive advertising PDU’s. Time = N * 0.625 msec Time Range: <=10msec.

Links

() ()